fo0bar

Forum Replies Created

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • March 23, 2012 at 2:07 pm in reply to: 5Ghz accesspoints #1628

    fo0bar
    Participant

    The unreleased 1.2.328 should work fine with your setup. Unfortunately I cannot pass around this version without consent from netspotter ;)

    February 17, 2012 at 6:32 am in reply to: 5Ghz accesspoints #1616

    fo0bar
    Participant

    great, thank you very much.

    February 16, 2012 at 5:04 pm in reply to: NetSpot for iPad #1613

    fo0bar
    Participant

    Frankb the API of iOS makes it simply not possible to do this. Its not like it would be so-so but not fine, or less accurate. It is simply impossible.

    February 16, 2012 at 4:39 pm in reply to: 5Ghz accesspoints #1612

    fo0bar
    Participant

    1.2.328 works for me with both 2.4 and 5Ghz Wifis. Unfortunately the scanspeed slowed down again :-)

    February 15, 2012 at 7:20 pm in reply to: 5Ghz accesspoints #1610

    fo0bar
    Participant

    as written via email. 1.2.327 did not scan the 5ghz networks (but once again scannes 2.4ghz ;) i’ve sent the project file to you.

    February 10, 2012 at 12:51 pm in reply to: 5Ghz accesspoints #1607

    fo0bar
    Participant

    Scanning takes about double time now, but it scans fine (only the 5Ghz networks, no 2.4Ghz). I was not asked to limit the range on the map after loading the map and giving it the distance of 2 fixed points.

    I sent the netspot project file to NetSpotter. Enjoy ;)

    February 10, 2012 at 12:42 pm in reply to: 5Ghz accesspoints #1606

    fo0bar
    Participant

    The build detects my 5Ghz networks fine (but no other networks ;)

    February 10, 2012 at 6:50 am in reply to: 5Ghz accesspoints #1605

    fo0bar
    Participant

    thank for the updated version. will try it out once i get back home from office.

    February 6, 2012 at 6:28 pm in reply to: 5Ghz accesspoints #1596

    fo0bar
    Participant

    I just sent the requested screenshots, as well as a screenshot of iStumbler showing the 5Ghz networks just fine.

    February 6, 2012 at 12:34 pm in reply to: 5Ghz accesspoints #1592

    fo0bar
    Participant

    I did, does not change anything. The 5GHz SSIDs do not get listed.

    I was actually connected to one of the 5Ghz SSIDs when doing the survey that i sent to netspotter. Of course I redid it when being connected to my 2.4Ghz SSID and while not connected to any SSID.

    Whatever I tried the 5Ghz nonhidden SSIDs did not show up.

    No other 5Ghz SSIDs showed up (but according to iStumbler I am the only one running 5Ghz Wifi in my range).

    February 5, 2012 at 1:28 pm in reply to: 5Ghz accesspoints #1590

    fo0bar
    Participant

    have sent the project file via email.

    February 5, 2012 at 1:10 pm in reply to: 5Ghz accesspoints #1589

    fo0bar
    Participant

    Sure, can do it, to what address should i send it?

    There are 2 airport extreme running. one is a 2nd gen, one a 5th gen.

    The 2nd gen is transmitting on 5Ghz only and has a dedicated SSID with WPA2 as encryption. the SSID is “fo0bar WPA2”.

    The 5th gen is able to transmit on 2.4 and 5ghz simulanously. the encryption for it is WPA2 enterprise and the SSID is “fo0bar” for 2.4ghz and “fo0bar 5ghz” for 5ghz (with each having a dedicated BSSID).

    none of the SSIDs is configured as a closed network (all SSID are broadcasted).

    only “fo0bar” (the 2.4ghz SSID) is showing up in netspot. both 5ghz networks are not listed.

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)